罗河铁矿采空区三维激光扫描及应用分析研究

针对传统采空区探测依靠全站仪测量存在劳动强度大、测量结果不准确等问题,采用BLSS-PE矿用三维激光扫描系统对罗河铁矿45-3^#和47-3^#采空区进行了现场扫描,构建了采空区三维实体模型,并在此基础上计算了采空区体积,说明了传统统计方式存在的不足;计算了矿房的超欠挖体积,为准确量化矿房损失率和贫化率提供了基础数据;基于采空区边界进行了二步骤回采设计,说明了采空区边界对于降低矿房损失贫化的重要意义。     

频率可调太赫兹回旋振荡管互作用电路的设计与研究

根据动态核极化核磁共振成像技术对回旋振荡管的要求,设计了130 GHz 回旋振荡管的注波互作用电路,基于线性理论对互作用电路进行了研究并选择了合适的工作点,分析了电路的频率调节特性。利用相对论电子回旋脉塞非线性理论对互作用系统进行了模拟和计算,优化了工作参数,计算了磁场及电子注参数对输出功率及效率的影响。最后,用粒子模拟方法进行了模拟并与非线性理论结果进行了比较,两者符合得很好。模拟结果显示,当电压为10 kV、电流为0.3 A、磁场强度由2.34 T 增加到2.41 T 时,输出功率由1310 W 减小到230 W,对应的效率分别为43.6%和7.7%,振荡管的频率可调范围约为2.7 GHz。     

Sparse non-convex Lp regularization for cone-beam X-ray luminescence computed tomography

Cone-beam X-ray luminescence computed tomography (CB-XLCT) is an attractive hybrid imaging modality, and it has the potential of monitoring the metabolic processes of nanophosphors-based drugs in vivo. However, the XLCT imaging suffers from a severe ill-posed problem. In this work, a sparse nonconvex L_p (0?p?L₁ regularization. Further, an iteratively reweighted split augmented lagrangian shrinkage algorithm (IRW_SALSA-L_p) was proposed to efficiently solve the non-convex L_p (0?p?p-values (1/16, 1/8, 1/4, 3/8, 1/2, 5/8, 3/4, 7/8) in both 3D digital mouse experiments and in vivo experiments. The results demonstrate that the proposed non-convex methods outperform L₂ and L₁ regularization in accurately recovering sparse targets in CB-XLCT. And among all the non-convex p-values, our L_p(1/4?p?相似文献   

MSCT多期增强扫描在肾脏透明细胞癌中的诊断价值

目的探讨多排螺旋CT(MSCT)多期增强扫描在肾脏透明细胞癌诊断中的规律性,提高对该肿瘤诊断水平。方法回顾性分析2016年1月~2018年6月14例均经手术切除病理证实为肾脏透明细胞癌患者的CT影像资料,所有病例均行MSCT平扫及多期动态增强扫描。结果14例肾脏透明细胞癌形态大多数呈圆形或者类圆形,瘤体最大径范围1.7cm^11.3cm,平均(4.8±1.4)cm,13例CT平扫时肿瘤密度不均匀,呈等低密度,1例呈等密度;12例出现坏死囊变,钙化1例,伴肾盂、肾盏侵犯2例;动态增强扫描可见12例包膜完整,1例均匀性强化,13例不均匀性强化;引入对比剂后皮质期,出现10例病灶强化幅度大于肾皮质,而仅4例低于肾皮质,三期平均CT值分别为110±30Hu,90±15Hu及75±14Hu,其中在实质期出现13例肿瘤强化幅度小于肾实质,仅1例大于肾实质。结论引入对比剂动态增强扫描后,肾脏透明细胞癌在皮质期明显不均匀强化,实质期强化幅度下降显著,呈现出典型的“快进快出”血流动力学强化方式,且肿瘤容易出现坏死、囊变为其特点。     

太赫兹波计算鬼成像:原理和展望

本文立足于太赫兹波成像领域近年来备受关注的研究热点—太赫兹波计算鬼成像,首先回顾了鬼成像从量子到经典再到计算的历史过程,然后阐述了计算鬼成像的数学原理,随后综述了计算鬼成像在太赫兹波段的发展历程,及其在超衍射分辨成像、石墨烯光电导成像、太赫兹光谱成像等方面的应用,并在最后展望了太赫兹波计算鬼成像的发展前景:计算鬼成像作为一种成像手段,可以绕开在太赫兹频段缺乏经济高效的焦面阵列式探测器的难题,但目前的成像帧率还难以满足快速成像的应用需求,相信在未来随着器件性能的提升和成像算法的优化,其成像帧率可以得到大幅提升。     

太赫兹脉冲焦平面成像技术的发展与应用

作为太赫兹技术中的重要组成部分,太赫兹脉冲焦平面成像一经问世就引起了行业内的广泛关注,人们引入了各种方法去提升此成像技术的测量性能,同时也尝试将此成像技术应用于不同的工业和基础研究领域。本文综述了近年来人们对太赫兹脉冲焦平面成像的技术改良和应用研究,包括提升成像系统的空间分辨率、信噪比、信息获取能力,以及将此成像技术应用于光谱识别检测、超表面器件功能验证、太赫兹特殊光束测量、太赫兹表面波观测等,希望该综述能够推动太赫兹脉冲焦平面成像的进一步技术革新和应用拓展。     

Preparation and properties of chitosan/acidified attapulgite composite proton exchange membranes for fuel cell applications

A composite proton exchange membrane chitosan (CS)/attapulgite (ATP) was prepared with the organic–inorganic compounding of ATP and CS. The composite membranes were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). The mechanical properties, thermal stability, water uptake, and proton conductivity of the composite membranes were fully investigated. The composite membranes exhibited an enhanced mechanical property, dimensional and thermal stability compared to CS membrane, owing to the interface interaction between ATP and CS. The maximum tensile strength of 53.1 MPa and decomposition temperature of 223.4°C was obtained, respectively. More importantly, the proton conductivity of the composite membrane is also enhanced, the composite membrane with 4 wt% ATP content (CS/ATP-4) exhibited the highest proton conductivity of 26.2 mS cm⁻¹ at 80°C with 100% relative humidity, which is 25.1% higher than pure CS membrane. These results may explore a simple and green strategy to prepare CS-based PEMs, which have a great potential in the application of proton exchange membrane fuel cells.     

Effects of cold plasma on the color parameters of Hyssop (Hyssopus officinalis L.) using color imaging instrumentation and spectrophotometer

This research was conducted to evaluate the effects of cold atmospheric plasma treatment on the color of Hyssop (Hyssopus officinalis L.) and also to compare the usage of the spectrophotometer vs the color imaging instrumentation for the evaluation of the treatment on the color parameters. The experiments were investigated at different treatment times of 1, 5, and 10 minutes and the voltage values of 17, 20, and 23 kV. Possible changes of color were evaluated by using CIE L*a*b* values obtained with HunterLab colorimeter and CIE L*a*b* values obtained with a digital still camera (DSC) using digital image processing (MATLAB software). The values of L*, a*, and b* of the samples were obtained using both the methods. The results revealed that the L*, a*, and b* values of the treated Hyssop samples changed with increasing the treatment time and the voltage applied. Evaluating the interaction effects revealed that there was a significant difference in the (−a^*/b^* ) ratio. In addition, the results showed that the effects of all variables on the color parameters were significantly different in the case of the DSC using digital image processing. However, these effects were not significantly different using HunterLab colorimeter except for time variable and interaction effects of a* and (−a^*/b^* ) ratio. The lightest green color and the maximum chlorophyll content loss were observed for 23 kV applied over 10 minutes. Based on the results, the digital image processing can be used as a practical tool to study the variations at the color of dried Hyssop leaves after cold plasma treatment.     

Improving EBSD precision by orientation refinement with full pattern matching

We present a comparison of the precision of different approaches for orientation imaging using electron backscatter diffraction (EBSD) in the scanning electron microscope. We have used EBSD to image the internal structure of WC grains, which contain features due to dislocations and subgrains. We compare the conventional, Hough-transform based orientation results from the EBSD system software with results of a high-precision orientation refinement using simulated pattern matching at the full available detector resolution of 640 × 480 pixels. Electron channelling contrast imaging (ECCI) is used to verify the correspondence of qualitative ECCI features with the quantitative orientation data from pattern matching. For the investigated sample, this leads to an estimated pattern matching sensitivity of about 0.5 mrad (0.03°) and a spatial feature resolution of about 100 nm. In order to investigate the alternative approach of postprocessing noisy orientation data, we analyse the effects of two different types of orientation filters. Using reference features in the high-precision pattern matching results for comparison, we find that denoising of orientation data can reduce the spatial resolution, and can lead to the creation of orientation artefacts for crystallographic features near the spatial and orientational resolution limits of EBSD.     

A Clearance Period after Soluble Lead Nanoparticle Inhalation Did Not Ameliorate the Negative Effects on Target Tissues Due to Decreased Immune Response

The inhalation of metal (including lead) nanoparticles poses a real health issue to people and animals living in polluted and/or industrial areas. In this study, we exposed mice to lead(II) nitrate nanoparticles [Pb(NO₃)₂ NPs], which represent a highly soluble form of lead, by inhalation. We aimed to uncover the effects of their exposure on individual target organs and to reveal potential variability in the lead clearance. We examined (i) lead biodistribution in target organs using laser ablation and inductively coupled plasma mass spectrometry (LA-ICP-MS) and atomic absorption spectrometry (AAS), (ii) lead effect on histopathological changes and immune cells response in secondary target organs and (iii) the clearance ability of target organs. In the lungs and liver, Pb(NO₃)₂ NP inhalation induced serious structural changes and their damage was present even after a 5-week clearance period despite the lead having been almost completely eliminated from the tissues. The numbers of macrophages significantly decreased after 11-week Pb(NO₃)₂ NP inhalation; conversely, abundance of alpha-smooth muscle actin (α-SMA)-positive cells, which are responsible for augmented collagen production, increased in both tissues. Moreover, the expression of nuclear factor κB (NF-κB) and selected cytokines, such as tumor necrosis factor alpha (TNFα), transforming growth factor beta 1 (TGFβ1), interleukin 6(IL-6), IL-1α and IL-1β , displayed a tissue-specific response to lead exposure. In summary, diminished inflammatory response in tissues after Pb(NO₃)₂ NPs inhalation was associated with prolonged negative effect of lead on tissues, as demonstrated by sustained pathological changes in target organs, even after long clearance period.